Skip to content

Activation

Before using the device, please activate it by logging into your SHINING 3D passport account first: power on > connect to the network > register / login.

Note

The device which has not been connected to the Internet or logged in can still be used to scan, but the scanned data can not be uploaded to SHINING 3D Digital Cloud.

Power On

To power on the device successfully, press and hold the power button for 2 seconds until the screen displays the startup animation.

Note

  • If the device remains black screen or displays a charging prompt , please promptly charge the device until it reaches the minimum battery level:
    • : Charging.
    • : Charging completes.
  • After powering on, please make sure to check the End User License Agreement first, or you will not be allowed to enter the Next Step.

Power Off

Press and hold the power button for 6 seconds to power the device off.

Connect Network

After entering the Connect Network interface, the device will automatically search for available wireless networks nearby every 10 seconds.
● indicates that the W-LAN is encrypted.
● indicates the signal strength of the W-LAN.

  • Tap to manually search for nearby W-LANs.
  • Tap or long press an unconnected W-LAN to enter the connection process.
  • Long press a connected W-LAN to delete it from the list.
  • Tap Next to register or log into SHINING 3D passport account.
  • Tap Skip to directly enter the scan process.

Note

  • When no network connected, you are not allowed to enter the Next step.
  • If you choose to Skip the network connection to directly enter the scan process, the scanned data can not be uploaded to SHINING 3D Digital Cloud or transferred to your computer.

Register / Login

After entering the Log in to SHINING 3D passport interface, you can choose to log in with verification code or password.
● Tap Log in and you will be prompted with " Login successful", then you will be directed to the scan interface.
● Tap to return to the Connect Network interface.
● Tap Skip to directly enter the scan process.

Note

  • If this is your first login, it is recommended that you choose to log in with a verification code. If your phone number or email is not registered, it will be automatically registered after verification.
  • If you choose to Skip the network connection to directly enter the scan process, the scanned data can not be uploaded to SHINING 3D Digital Cloud or transferred to your computer.

Device Connection

Note

  • Before activating the device, it can not be connected to your computer to transfer files.
  • If the device is connected to your computer through a cable, but the StarVision software is not started, the device will be charged only.

Use a cable to connect the device to your computer, and a pop-up window will appear (as shown in the right figure); if you choose File transfer, you can check device files on StarVision.