Connection

Before running the software, please connect the scanner first. Please use the correct cable connection and connect the scanner to the computer by plugging it into the USB 3.0 port of the computer.

Caution

• Please do not run the program directly from the USB driver, the software must be copied from the USB driver to the computer's hard drive and the user must have read and write access to the folder to which the scanning software belongs.

• Use the power adaptor, cable, and power cord provided by SHINING 3D matching to the scanner.

Steps

1. Place the device on a stable surface.

   Note

   To ensure calibration and scanning accuracy, please avoid placing the device under strong light sources (such as direct sunlight).

2. Connect the device to the computer's USB 3.0 port using a data cable.

3. Connect the device's power cable.

4. Press the power button located on the rear side of the device.