Skip to content

Device

FreeScan UE Pro2 (referred to as the "scanner") is a handheld blue laser 3D scanner independently developed by SHINING 3D Tech Co., Ltd. This scanner features high-precision scanning capabilities and utilizes an embedded edge computing module to achieve wireless scanning. With a lightweight design of 930 grams and compatibility with various standard specifications of power banks, it revolutionizes the portability of handheld laser 3D scanners, enhancing the overall scanning experience and efficiency.

Appearance

Appearance Button
No.
Description
1 To indicate the scanning distance.
Red: Too close. Yellow: Relatively close. Green: Suitable distance. Greenish-blue: Relatively far. Blue: Too far.
2
  • Up and down buttons: Size adjustment buttons for data display in a 3D scene. Press the up button to zoom in the model; press the down button to zoom out the model.
  • Left and right buttons: Camera brightness adjustment buttons. Press the left button to decrease brightness; press the right button to increase brightness.
  • Press and hold the left button: To switch scan modes in a loop.
  • Press and hold the right button: To switch scan objects in a loop.
  • Middle button: Press to bring up the menu panel; then press the left button to quickly exit the menu panel.
  • Press and hold the middle button: To switch light source modes in a loop.
  • Power indicator: Only after the power indicator lights on, you can operate the device. Cyan: Power on. Blue: Standby. Green: Preview. Red: Scanning.
    		•
    3
  • In scanning interface, press the button to switch the scanning status in a loop: preview > scanning > pause / finish scanning.
  • In scanning interface, press and hold the button to perform global markers optimization in scan global markers mode and photogrammetry mode.
    		•
    4
    Port for a data cable
    5
    Port for a power cable

    Laser Information

    Class 2 Laser Product

    Laser power: < 1 mW

    Wavelength: 450 nm

    Complies with FDA performance standards for laser products except for conformance with IEC 60825-1 Ed.3., as described in Laser Notice No.56, dated May 8, 2019.

    Caution

    Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

    Labels

    Read the content on the yellow sticker carefully before using the device.

    Logo
    Description
    LVD/EMC Directive
    This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
    WEEE Directive-2012/19/EU
    The product this manual refers to is covered by the Waste Electrical&Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.
    The UKCA marking is the product marking used for products being placed on the market in Great Britain (England, Scotland and Wales).