Skip to content

Settings

Scan Mode

Choose the proper scanning mode to scan.

  • Scan Global Markers

    This mode is used to scan markers on the surface of an object. You can quickly obtain the markers data of an object in this way and switch to Scan Mesh to continue scanning.
    Caution

    • The scanner does not project laser lines during the scanning process.
    • You can scan new markers after opening a global markers file.
    • When switching to Scan Global Markers, the current scanned data will be cleaned up and the data can not be recovered.

  • Scan Mesh

    Directly scan to generate mesh data. This mode is suitable for most scanning scenarios.
    Note

    When the markers are not fully scanned in Scan Global Markers, you can check Add Global Markers to scan new global markers.

  • Partial HD Scanning

    This mode is used for scanning when there is a high requirement for details in a specific area or when there are missing data in certain regions. By using this mode for targeted scanning, it can save scanning time and make the scanned data more accurate and complete.

  • Photogrammetry

    This mode is generally suitable for high-precision industrial measurements. Depending on the size of the scanned object(s), you can import an appropriate scale bar file and use the scale bar(s) during scanning to improve the overall accuracy of the global markers data.

Resolution

Note

  • When there is only one project within the project group, you can adjust the resolution in real-time in the scan mesh mode.
  • When there are multiple projects within the project group, you cannot adjust the resolution anymore in the scan mesh mode.
Scan Mode Point Distance
Scan Mesh Standard：0.05 mm ~ 10.0 mm
Advanced mode：0.01 mm ~ 10.0 mm
Partial HD Scanning Standard：0.02 mm ~ 3.0 mm
Advanced mode：0.01 mm ~ 3.0 mm

High-speed Mode

The high-speed mode of the scanner will lose some details. Please turn off the mode when the point distance is less than 0.1 mm.

Light Source Mode

According to the scanning requirements, you can choose different laser line modes.

Light Source Mode
Description
50 Lines 50 cross laser lines to scan large objects quickly
7 Lines 7 parallel laser lines to scan fine details
1 Line A single laser line for deep holes and pocket area scanning

Object

It supports scanning of both normal objects and reflective objects. When scanning reflective objects, select Reflective to improve the scanning effect.

Outdoor Mode

To scan normally in the glare environment such as outdoors.

Caution

Please avoid direct sunlight when scanning objects.

Data Quality Indicator

Differentiating scan quality in colors: blue represents high-quality scanned data and yellow represents insufficient scanned data that requires further scanning. Insufficiently scanned data may disappear or become anomalous after editing.

Note

This function is not available for scanning in scan markers mode or photogrammetry mode.

Local Enlarged View

When the function is enabled, the scanning interface only displays the local perspective of the scanned object, which can be used for supplementary scanning of small holes. It is recommended to enable under 0.2 mm point distance.

View Lock

The object view will be locked during scanning and not follow the scanning path, when the function is enabled.

Brightness

For objects of different materials and colors, adjust the brightness of the scanner to scan better.

Col

Too Bright

Col

Proper

Col

Too Dark