Skip to content

Mesh editing

Meshing is to convert the point cloud into a triangular mesh surface. The data after mesh can be directly used for rendering, measurement or printing.

  • Filter

    Optimize the data and improve the clarity of the data. The higher the level, the less the small details.

    • None: No optimization.

    • Standard: Optimizes data slightly and preserves data characteristics.

    • Med: Reduce the noise on the surface of the scan data.

    • High: Reduce the noise on the surface of the scan data and sharpen it powerfully.

  • Remove small floating parts

    Remove small floating parts on the model.

    Col

    Original data

    Col

    Remove 50

    Col

    Remove 100

  • Max triangles

    Set max plate number to get mesh model's triangle plate number is within configured plate number.

  • Fill small hole

    Auto fill the small hole with a perimeter less than or equal to 10 mm (by default). You can set the hole-filling perimeter.

  • Remove spike

    Remove spike-like data on the image edge.

  • Markers hole filling

    Fill the surface holes on an object that were not scanned due to being occluded by markers.

  • Recommended parameters

    When turning on, it will automatically use the recommended parameters for meshing.