Scanning¶
Laser scan can quickly and accurately acquire 3D data of the scanned object. Featured in contact-free measurement, high sampling rate of data, active emission of scanning light source, low requirements for use, and strong environmental adaptability, laser scan can be used in complex environments, and acquire complete 3D data of large and complex objects into the computer, thereby reconstructing the corresponding 3D model as well as various geometric data concerning the points, lines, surfaces, and solids.
Scan Operation¶
You can use the button on the device or click the icons in the software interface to switch among the three states. The basic switching order is: Preview > Scan > Pause.
| Function | |
|---|---|
 Preview |
To preview the scanned data without saving. In preview mode, you can adjust scan parameters based on the scanning effect. You can enable or disable Preview by clicking  in the upper right corner to open the settings interface. When disabled, this button will not appear on the scanning interface. |
 Scan |
Start scanning. The scanned data will be saved to the specified path. Caution |
 Pause |
Pause scanning. You can edit the scanned data. |
- Select New Project Group.
- Select Track Mode or Scanner Mode based on the actual scenario.
- Set scan mode, scan object, and other relevant scan parameters, and adjust the scanning brightness.
- Click on the right to start scanning.
- During scanning, monitor the image data on the screen in real time, adjust the scanning distance as needed, and move the scanner slowly and steadily until the object is fully scanned. In other words, once the Data Quality Indicator is enabled, the data will appear blue.
- Click to pause scanning.
- Rotate, zoom, and perform other operations to check data completeness; click
to save the scanned data.
For more detailed operations, please refer to the operation guide for each mode through the left navigation bar.