Getting Started¶
The following is an overview guide to the hardware and software (V1.0.0.3), making it easy for you to quickly locate the corresponding operation help content.
About Hardware¶
-
Here you can learn about the hardware-related information of the device, including device introduction, device appearance and device connection.
About Software¶
-
Here you can learn about software-related information of the device, including software installation, device activation and other content.
After successfully installing the software and activating the device, you can follow the steps below to operate the device.
-
Calibration
Calibration is mainly used to re-adjust parameters of the device, which can ensure its accuracy and improve the scanning quality.
If you are using the device for the first time, please do calibration. After that, the software will automatically skip this step when you run it again. -
Create Project Group
Before scanning, you need to choose the storage path for the files and create a project group.
How to Create or Open a Project Group?
How to Operate on a Single Project Within the Project Group?
-
Set Scan Parameters
After creating a project group, you can set the scan parameters for the project before scanning to get better scanning effect.
-
Scan
Scan the object and obtain the data.
-
Edit Scanned Data
You can edit the scanned data to reduce noise and obtain accurate data after pausing scanning or after the scan is completed.
-
Save and Export Data
You can save the scanned data for future import or export.
-
Post-Processing and Measurement
You can process or measure the scanned data.
FAQ¶
- Click here to jump to the FAQ chapter.